PERFORMANCE
CLUTCHES
0 Item
   $0.00

Products

 

 

Mantic 7000 Series

The Mantic 7000 series in a triple 7.25” (184mm) diameter high perfroamnce clutch, available as a triple-disc direct fit (LS engines) configuration ( refer to our catalogue for listings) or can be used in custom applications. It offers 984ft lbs (1330nm) of torque drive, with low MOI (Moment of Inertia) for superior performance. The 7000 series come with metallic solid centre clutch discs. This is a racing style clutch that is not designed for everyday street use. Direct fit LSx kits are supplied with CSC, flywheel, triple-disc clutch and hardware.

Mantic 9000 Series

Mantic 9000 Series clutches are available in a single, twin and triple disc, 9” (225mm) diameter modular clutches that are designed for high performance road cars or for track use. Mass is critical for a high performance clutch to produce the expected level of performance, and Mantic offers two levels of low mass clutches to allow you to optimize your vehicle performance to your personal driving style. They offer up to 1010ft lbs of torque drive capability. Mantic 9000 Series are low MOI (Moment of Inertia) twin disc clutches that offer a level of performance not only superior to a single disc unit, but also allow you to select options that best suit you. All 9000 Series are made with premium quality materials designed to perform and last the distance.

Mantic Street with ER2

Mantic Street with ER2; is a clutch kit specifically designed for the performance market. It features the patented groove design, ER2, which is CNC machined on the friction face of the pressure plate. Capable of transmitting greater than 60% more torque than a standard clutch kit, Mantic Street with ER2 is suitable for high performance vehicles. This overall torque capacity increase has been achieved by higher clamp loads, increased Mean Effective Radius of the friction area, better cooling of the pressure plate and higher coefficient of friction materials on the clutch disc. These design innovations directly equate to higher torque capacity. The clutch disc features an organic facing ring in contact with the pressure plate and a segmented cerametallic facing on the flywheel side. The cover assemble also features a decorative and corrosion resistant finish.

Mantic 4WD with ER²

The Mantic 4WD Clutch kit has a number of features which make the product distinctly new. The Clutch Kit comprises of a Cover Assembly, Clutch disc and Release Bearing. The kit itself is designed with offroad drivers in mind. The cover assembly’s pressure plate is manufactured from Spheroidal Graphite casting material which has a yield strength 300% higher than standard castings. The materials microstructure also improves heat dispersion. The cover assembly also incorporates greater Clamp Load than a standard cover assembly. This translates to more torque transfer. This casting material has not been used in this application previously and is especially useful in 4WD applications where higher clutch operating temperatures and load transfer are experienced and required i.e. Purposeful clutch system slipping for off road situations, towing and maneuvering external vehicle payloads like trailers and caravans. The clutch kit’s clutch disc has a unique flywheel side friction material. The Aramide friction material exhibits 50% less wear than a conventional clutch disc’s friction material. This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as the operating temperature increases. This feature in combination with the previously mentioned microstructure of spheroidal graphite casting allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. The aramide friction material is arranged on the flywheel side of the clutch disc in a segmented fashion. The arrangement of the geometric form of each of the segments increases the Mean Effective Radius (Rm) of the clutch disc. By increasing the Rm the clutch the transmittable torque increases.

Mantic Flywheel and Release Bearings

Direct fit kit availability for popular vehicles. Wide range of fitment for 9000/7000 series clutches. Manufactured on automated CNC Twin turret lathe for consistent quality control. All direct fit kits are supplied with equivalent OE Release Bearing, Concentric Slave Cylinder or Hydraulic Release Bearing as is required for that specific application.

ALL MANTIC DISCS FEATURE FORGED, ALLOY STEEL HUBS FOR INCREASED STRENGTH AND RELIABILITY. Spline failure should not be an option for a high performance clutch.

 

Items 1 to 9 of 93 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction

Items 1 to 9 of 93 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction