Twin Ceramic Cushioned Sprung

More Views

Twin Ceramic Cushioned Sprung
M921232

Regular Price US$2,284.80

Special Price US$1,367.45

Availability: Out of stock

Product Description

This clutch kit is designed to replace the Original Equipment (OE) unit including the OE flywheel.

This kit includes a solid mass flywheel (SMF). If your vehicle was fitted with a dual mass flywheel (DMF) as original equipment (OE), changing from a dual mass flywheel (DMF) to a solid flywheel (SMF) increases the reliability of your clutch system and allows the flywheel to be machined for longer life. However you might experience slightly more noise or vibration comparied to a DMF clutch system.

Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Track replacement clutch kit offers a extremely high torque capacity increase.

Each component has been thoroughly tested and developed for a specific application.

This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 60 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle.

WHY CHOOSE A MANTIC TRACK MULTIPLATE CLUTCH KIT

Performance Clutch Systems typically involve an increase in clamp load and/or use of aggresive friction material to achieve higher torque capacity. However there is a practical limit - Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reducing clutch system life and resulting in very high clutch pedal actuation effort. And the use of aggressive friction material will noticeably reduce driveability. Enter the benefits of a Mantic multi-plate clutch system. A 9 Twin Plate Mantic Track system has the same effective surface area as an 18 single plate clutch; and a 9 Triple Plate Mantic Track system equates to 27. So increasing clamp load is no longer a priority as the significantly larger surface area creates a massive torque capacity increase.

LIGHTENED ALUMINIMUM MANTIC TRACK COVER ASSEMBLY

Mantic Track cover assemblies are extremly light which reduce the moment of interia (MOI) acting on crank rotation mass, allowing your vehicle to develop faster acceleration through easier rev'ing.

CERAMETALLIC FRICTION MATERIAL CLUTCH PLATES

The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. This Mantic Track Clutch System features German engineered and manufactured cerametallic friction material on both sides of the clutch plates. This results in a strong torque capacity increase compared with Organic alternatives - but reduced street driveability. The plates in this kit include cushioned segments and a sprung hub to maintain a reasonable level of street drivability.

STEEL BILLET PRECISION MACHINED FLYWHEEL

This is a Direct Fit Mantic Track Clutch kit and therefore includes a precision machined billet flywheel designed to suit high RPM applications. The flywheel includes a bolt kit and everything you need to assemble your Mantic Track Clutch System. If you wish to assemble a Mantic Track Clutch System to a different flywheel, as you have a non-standard engine/gearbox configuration, contact us for details on our non-direct fit kits.

More Information

Additional Information

Warranty

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase.

  • Warranty does not cover:
  • A. Normal wear and tear, including wear and tear of any friction materials forming the surface between the clutch disk and pressure plate or used as a component of the product
  • B. Any defect or damage caused by a collision or other accident
  • C. Any defect or damage caused by the failure to store, handle, install, assemble, maintain or use the product in accordance with manufacturer instructions or specifications, including but not limited to: (a) modification of the product by the customer in any way; or (b) installation of the product in a vehicle that is not in full compliance with the instructions and specifications of the manufacturer of that vehicle
  • D. Any defect or damage arising directly or indirectly as a result of racing or competing in the vehicle in which the product is installed
  • E. Any defect or damage arising directly or indirectly as a result of the failure to use and install an appropriate scatter shield
  • 6. We reserve the option to repair or replace products at no charge if found to be defective during the warranty period.
  • 7. This warranty will be VOID automatically if in our reasonable opinion the product has been subject to any unreasonable use, misuse, negligence, fire, or accident; or the product has been modified, repaired or dismantled without the prior written authorization; or any part has been replaced with a non-approved part. We reserve the sole right to inspect, evaluate and test the purportedly defective product in any way deemed appropriate by clutchsales.com.au, and then make the final decision as to whether the product in fact is faulty or defective in material or workmanship. This is our exclusive written warranty. We make no other express warranties, nor is anyone else authorized to make any express warranties on our behalf.
  • 8. Upon discovering a purported defect that you believe is covered by this warranty, you must immediately (within 30 days) return the product to us, together with a detailed written description of the purported defect and proof of original purchase.
  • 9. No warranty claim will be accepted under this warranty for incorrectly installed parts unless approved by clutchsales.com.au under the clutchsales.com.au ?No fault? warranty provision, which may be withheld at the absolute discretion of clutchsales.com.au.
  • 10. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
  • WARNING: DO NOT USE ANY CLUTCHSALES.COM.AU PRODUCT IN VEHICLES WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO TRANSMISSION GUARDS, AS SUCH USE MAY CAUSE THE PRODUCT TO EXPLODE UNEXPECTEDLY CAUSING SERIOUS INJURY AND/OR DEATH.
Feature 1 9 Lightened Aluminium Cover Assembly
Feature 2 Twin Cerametallic Clutch Plates
Feature 3 German Engineered Friction Material
Technical Spec

Additional Information

Weight (KG) 30.00
Package Length (CM) 40
Package Height (CM) 15
Package Width (CM) 30
Flywheel Specs
Tech Comments
Clutch Plate 225 x 10T x 27
Torque Capacity Peak: 2050Nm, Rated: 1367Nm
Tech Documents View FileUnderstanding Clutch Systems    Size: (6.64 MB)
View FileMantic Install    Size: (981.57 KB)
View FileVehicle Specific Clutch Kit Installation Notes    Size: (366.73 KB)
View FileVehicle Specific Clutch Kit Installation Notes    Size: (580.13 KB)
View FileVehicle Specific Clutch Kit - Installation Notes